how to take apart notebook


STEP 9
Now you can fine one cable(most probably black colors) from LCD and it is connected to system board. Disconnect the LCD cable from the system board.
Remove the screw connecting the LCD cable to the base.
Disconnect the flat LED board cable from the system board.

STEP 10
Carefully lift the display/LCD assembly off the base.

The display/top cover assembly - LCD assembly and top cover assembly connected by hinges


STEP 11
Remove the screw securing the HardDisk holder.
Remove the Hard disk holder.
Disconnect the left and right speaker cables from the system board.



STEP 12
Now remove five screws securing the heatsink assembly for CPU. And disconnect the fan cable from the main board


STEP 13
Carefully take out the heat sink off the CPU. And be sure to put heat sink thermal jel /glue when reconnecting the heat sink.


STEP 14
Remove two screws normally at the corner side connecting the system board to the base


STEP 15
Now lift of the system board starting from the left side, be careful with the PC card connector.



STEP 16
Remove the system board off the base.